Hammer-in anchor

A hammer-in anchor provides definitive anchorage for moderately to heavily stony ground, or even for certain types of slaty soil.

Avantages

• Saves time during preparation and installation.

• Easy and effective anchoring at a competitive price.
• Model tested and adapted according to requirements determined by the customers.
• Anchors respect the environment thanks to their minimum above and below ground encroachment.
• The products are available from a large distribution network.
• Anchor design is the fruit of research, testing, and validation by a control office.
• Certified welds protect against corrosion.

Characteristics	Technical Data
Natural shaft spear	700 mm to 1 500 mm
Galvanised shaft spear	500 mm to 1 500 mm
Diameter of the shaft	Ø 12, Ø 16 and Ø 18
Fins	2 or 3 depending on the model
Bichromated AMA plate	Surface area from 6,100 mm2 to 34,500 mm2
Galvanised AMA plate	Surface area 10,600 mm2
Rocker anchor	Depth 800 mm
Shaft welded eyelets, galvanised or stainless steel multitoron cable	Ø 8 mm Ø 3 to 8 mm Lenght. 500 to 1500 mm

Selection of rockers and cables

We offer four rocker models: No.1, No.2, No.3, and No.4.
The anchors' resistance when extracted depends on the type of soil, the rocker model, and the cable's own resistance. The ranges are displayed in the table below:
-The minimum value corresponds to an unstable soil type such as sand or loose gravel.
-The minimum value corresponds to highly stable soil type such as clay.

Rockeers/ cables	Cable Ø3 (Breaking resistance:  700kg)	Cable Ø5 (Breaking resistance: 1600kg)	Cable Ø6 (Breaking resistance: 2900kg)	Cable Ø8 (Breaking resistance: 4800kg)
Plate N°1	from 100 to 560 kg	-	-	-
Plate N°2	from 500 to 2,200 kg
Plate N°3	from 500 to 3,000 kg
Plate N°4	-	-	-	from 500 to 4 000 kg

Download